Adapter SS Flex to Flex
Adapter SS Flex to SS
Adapter SS to Flex
Secure Seal Flex
SS Mitter Cut
SS Termination Tee With Screen
SS Exit Cone
SS 90° Screen Termination
SS 30° Screen Termination
SS Screened Termination
SS Rain Cap
SS Storm Collar
SS Adjustable Flashing
SS Flat Flashing
SS to SSD/SSID Adaptor
SS Female Flange Adapter
SS Male Flange Adapter
SS Double Male Adapter
SS Guy Support
SS Wall Guide
SS Centering Band
SS Guy Wire Band
SS Roof Brace
SS Anchor Plate HD
SS Length Anchor Plate
SS Anchor Plate
SS Roof Support
SS Wall Support HD
SS Wall Support
SS Cradle Support
SS Suspension Band
SS Roof Thimble
SS Wall Thimble Insulated
SS Wall Thimble
SS Eccentric Step Reducer
SS Eccentric Tapered Reducer
SS Step Reducer
SS Tapered Reducer
SS Eccentric Tapered Increaser
SS Step Increaser
SS Tapered Increaser
SS Drain Tee Cap
SS Tee Cap
SS Barometric Tee
SS Lateral Secure Tee 88-Degree
SS Lateral Secure Tee
SS 90-Degree Tee Y
SS 90-Degree Tee
SS 88-Degree Tee
SS 45-Degree Tee
SS 43-Degree Tee
SS 90-Degree Elbow
SS 88-Degree Elbow
SS 45-Degree Elbow
SS 30-Degree Elbow
SS 15-Degree Elbow
SS 2-Degree Elbow
SS Vent Flow Regulator
SS Damper Length Short
SS Telescopic Length
SS K&W Fixed Blade Damper Lengths
SS Damper Lengths
SS Drain Length
SS Test Port Lengths
SS Adjustable Lengths
SS Lengths
SSD & SSID OEM Termination
SSD & SSID Closer Termination
SSD & SSID Mitter Cut
SSD & SSID Termination Tee With Screen
SSD & SSID Exit Cone
SSD 90° Screen Termination
SSD & SSID 30° Screen Termination
SSD & SSID Rain Cap
SSD & SSID Storm Collar
SSID Adjustable Flashing
SSD Adjustable Flashing
SSID Flat Flashing
SSD Flat Flashing
SSID to SSD Adaptor
SSD to SSID Adaptor
SSD & SSID to SS Adaptor
SSD & SSID Female Flange Adaptor
SSD & SSID Male Flange Adaptor
SSD & SSID Double Male Adaptor
SSD & SSID Guy Support
SSD & SSID Wall Guide
SSD & SSID Centering Band
SSD & SSID Guy Wire Band
SSD & SSID Roof Brace
SSD & SSID Anchor Plate HD
SSD & SSID Length Anchor Plate
SSD & SSID Anchor Plate
SSD & SSID Roof Support
SSID Wall Support HD
SSD Wall Support HD
SSD & SSID Wall Support
SSD & SSID Cradle Support
SSD & SSID Suspension Band
SSD & SSID Roof Thimble Insulated
SSD & SSID Roof Thimble
SSD & SSID Wall Thimble Insulated
SSD & SSID Wall Thimble
SSD Universal Muffler
SSD & SSID Eccentric Step Reducer
SSD & SSID Eccentric Tapered Reducer
SSD & SSID Step Reducer
SSD & SSID Tapered Reducer
SSD & SSID Eccentric Step Increaser
SSD & SSID Eccentric Tapered Increaser
SSD & SSID Step Increaser
SSD & SSID Tapered Increaser
SSD & SSID Drain Tee Cap
SSD & SSID Tee Cap
SSID Barometric Tee
SSD Barometric Tee
SSD Lateral SecureTEE 88-Degree
SSD Lateral SecureTEE 88-Degree
SSID Lateral SecureTEE
SSD Lateral SecureTEE
SSID 90-Degree Tee Y
SSD 90-Degree Tee Y
SSID 90-Degree Tee
SSD 90-Degree Tee
SSID 88-Degree Tee
SSD 88-Degree Tee
SSID 45-Degree Tee
SSD 45-Degree Tee
SSID 43-Degree Tee
SSD 43-Degree Tee
SSID 90-Degree Elbow
SSD 90-Degree Elbow
SSID 88-Degree Elbow
SSD 88-Degree Elbow
SSID 45-Degree Elbow
SSD 45-Degree Elbow
SSID 30-Degree Elbow
SSD 30-Degree Elbow
SSID 15-Degree Elbow
SSD 15-Degree Elbow
SSID 2-Degree Elbow
SSD 2-Degree Elbow
SSD Telescopic Lengths
SSD & SSID Vent Flow Regulator
SSD K&W Fixed Blade Damper Lengths
SSD & SSID Damper Lengths Short
SSD & SSID Damper Lengths
SSD & SSID Drain Lengths
SSD & SSID Test Port Lengths
SSD & SSID Adjustable Lengths
SSD & SSID Lengths
-
Adapter SS Flex to Flex
-
Adapter SS Flex to SS
-
Adapter SS to Flex
-
Secure Seal Flex
Use to vent Category II,III and IV gas burning appliances. Listed to UL 1738. Can only be used in vertical or near vertical runs. Custom Flex Lengths 4”-9” diameter orders must be minimum 10’ to maximum of 50’ (increments of 10’). For 10”-12” diameters orders must be minimum 10’ to maximum 25’ (increments of 10’). -
SS Termination Tee With Screen
Use for standard and high-wind through-the-wall terminations. Check installation instructions for restrictions on horizontal terminations, such as minimum distance from windows and doors. -
SS Exit Cone
Use for vertical termination. Creates static back pressure to adjust harmonics. Venturi effect increases velocity of flue gases. Reduced opening provides for a smaller cross section to deter rain from entering the system. -
SS 90° Screen Termination
Use for through-the-wall termination. Deters rain and other elements from entering the vent system. Check installation instructions for restrictions on horizontal terminations, such as minimum distance from windows and doors. -
SS 30° Screen Termination
Use for through-the-wall termination. Deters rain and other elements from entering the vent system. Check installation instructions for restrictions on horizontal terminations, such as minimum distance from windows and doors. -
SS Screened Termination
Use for horizontal through-the-wall terminations. Check installation instructions for restrictions on horizontal terminations, such as minimum distance from windows and doors. -
SS Rain Cap
Use to terminate above the roof line. Not recommended in cold climate as condensate can freeze on cap. -
SS Storm Collar
-
SS Adjustable Flashing
Adjustable from 5° to 30°. Roof pitch 1/12” to 7/12”. -
SS Flat Flashing
-
SS to SSD/SSID Adaptor
-
SS Female Flange Adapter
-
SS Male Flange Adapter
-
SS Double Male Adapter
-
SS Guy Support
-
SS Centering Band
-
SS Guy Wire Band
-
SS Anchor Plate HD
Use when penetrating floor levels. -
SS Length Anchor Plate
-
SS Anchor Plate
Use when penetrating floor levels. -
SS Roof Support
-
SS Wall Support HD
-
SS Wall Support
Use to support vent pipe or tee sections. Provides proper clearance to combustibles. -
SS Cradle Support
-
SS Suspension Band
-
SS Roof Thimble
Roof/floor penetration opening dimensions available in the installation instructions manual. -
SS Wall Thimble Insulated
Wall penetration opening dimensions available in the installation instructions manual. -
SS Wall Thimble
Use for through-the-wall installation. Fits between standard wall studs. Wall penetration opening dimensions available in the installation instructions manual. -
SS Eccentric Step Reducer
-
SS Eccentric Tapered Reducer
-
SS Step Reducer
Use to reduce vent diameter when space constraints are an issue. Available in custom size combinations. -
SS Tapered Reducer
Use to reduce vent diameter. Creates a smooth transition for an undisruptive flow. Available in custom size combinations. -
SS Eccentric Tapered Increaser
-
SS Step Increaser
Use to increase vent diameter when space constraints are an issue. Available in custom size combinations. -
SS Tapered Increaser
Use to increase vent diameter. Creates a smooth transition for an undisruptive flow. Available in custom size combinations. -
SS Drain Tee Cap
Use instead of Tee Cap to manage condensates at the bottom of a vertical run. Drain plug not included. Drain Ø4 – Ø10, 1/4 NPT, 1/2 0.D Drain Ø12 – Ø24, 3/8 NPT, 5/8 0.D -
SS Tee Cap
Use to cap Standard Tee, Branch Tee or Boot Tee. Remove Tee Cap to inspect the system; clean out debris or collected condensate. -
SS Barometric Tee
Available with smaller snout and custom height. -
SS Lateral Secure Tee 88-Degree
Use to transition from horizontal to vertical with improved flue gas flow. -
SS Lateral Secure Tee
Use to transition from horizontal to vertical with improved flue gas flow. -
SS 90-Degree Tee Y
Available with smaller snout and custom height. -
SS 90-Degree Tee
Use for a 90° offset, or to combine connections from two or more appliances into a common vent. Can also use as a condensate management point when used in conjunction with drain fitting. All Standard Tees are completely welded. -
SS 88-Degree Tee
Use for a 88° offset, or to combine connections from two or more appliances into a common vent. Can also use as a condensate management point when used in conjunction with drain fitting. All Standard Tees are completely welded. -
SS 45-Degree Tee
Use in place of any tee for a 45° angle instead of 90°; can be used as a manifold connection to gang multiple boilers into a common vent. -
SS 43-Degree Tee
Use in place of any tee for a 43° angle instead of 90°; can be used as a manifold connection to gang multiple boilers into a common vent. -
SS 90-Degree Elbow
Use to go from horizontal to vertical runs or vertical to horizontal runs. Use to turn vent 90°. -
SS 88-Degree Elbow
Offsets obstructions as needed. Allows for better condensate management and less back pressure. -
SS 45-Degree Elbow
Offsets obstructions as needed. Allows for better condensate management and less back pressure. -
SS 30-Degree Elbow
Offsets obstructions as needed. Allows for better condensate management and less back pressure. -
SS 15-Degree Elbow
Offsets obstructions as needed. Allows for better condensate management and less back pressure. -
SS 2-Degree Elbow
Offsets obstructions as needed. Allows for better condensate management and less back pressure. -
SS Vent Flow Regulator
-
SS Damper Length Short
-
SS Telescopic Length
Telescopic lengths do not require cutting to fit dimension. -
SS K&W Fixed Blade Damper Lengths
-
SS Damper Lengths
-
SS Drain Length
Use to properly manage corrosive condensates common with high efficiency gas appliances. For best results, install close to the appliance. Can be used horizontally, vertically, or any angle in between. Drain plue not included. Drain Ø4 – Ø10, 1/4 NPT, 1/2 0.D Drain Ø12 – Ø24, 1/2 NPT, 5/8 0.D -
SS Test Port Lengths
Use to test for proper appliance operation without penetrating the vent wall. Easy access to perform flue gas analysis. Test port plug included. Drain Ø4 – Ø24, 1/4 NPT, 1/2 0.D. -
SS Adjustable Lengths
Use to add length to straight length of SS pipe. Adds 2”–14” of length. Requires at least 4” overlap for a secure connection. -
SS Lengths
Use to vent category II, III and IV appliances. -
SSD & SSID OEM Termination
Note: SSID 3”, 9” and 24” not available. -
SSD & SSID Closer Termination
Note: SSID 3”, 9” and 24” not available. -
SSD & SSID Mitter Cut
Use for standard and high-wind through-the-wall terminations. Check installation instructions for restrictions on horizontal terminations, such as minimum distance from windows and doors. -
SSD & SSID Termination Tee With Screen
Use for standard and high-wind through-the-wall terminations. Check installation instructions for restrictions on horizontal terminations, such as minimum distance from windows and doors. -
SSD & SSID Exit Cone
Use for vertical termination. Creates static back pressure to adjust harmonics. Venturi effect increases velocity of flue gases. Reduced opening provides for a smaller cross section to deter rain from entering the system. Note: SSID 3”, 9” and 24” not available. -
SSD 90° Screen Termination
Use for through-the-wall termination. Deters rain and other elements from entering the vent system. Check installation instructions for restrictions on horizontal terminations, such as minimum distance from windows and doors. -
SSD & SSID 30° Screen Termination
Use for through-the-wall termination. Deters rain and other elements from entering the vent system. Check installation instructions for restrictions on horizontal terminations, such as minimum distance from windows and doors. Note: SSID 3”, 9” and 24” not available. -
SSD & SSID Rain Cap
Use to terminate above the roof line. Not recommended in cold climate as condesate can freeze on cap. -
SSD & SSID Storm Collar
Use to create a weather tight seal between the pipe and flashing. Note: SSID 3”, 9” and 24” not available. -
SSID Adjustable Flashing
Adjustable from 5° to 30°. Roof pitch 1/12” to 7/12”. 9” and 24” not available. -
SSD Adjustable Flashing
Adjustable from 5° to 30°. Roof pitch 1/12” to 7/12”. -
SSID Flat Flashing
Use to create a weather tight penetration where the vent passes through the roof. 9” and 24” not available. -
SSD Flat Flashing
Use to create a weather tight penetration where the vent passes through the roof. -
SSID to SSD Adaptor
Note: SSID 3”, 9” and 24” not available. -
SSD to SSID Adaptor
Note: SSID 3”, 9” and 24” not available. -
SSD & SSID to SS Adaptor
Note: SSID 3”, 9” and 24” not available. -
SSD & SSID Female Flange Adaptor
Note: SSID 3”, 9” and 24” not available. Hardware not included. -
SSD & SSID Male Flange Adaptor
-
SSD & SSID Double Male Adaptor
Note: SSID 3”, 9” and 24” not available. -
SSD & SSID Guy Support
Note: SSID 3”, 9” and 24” not available. -
SSD & SSID Wall Guide
Note: SSID 3”, 9” and 24” not available. -
SSD & SSID Centering Band
Note: SSID 3”, 9” and 24” not available. -
SSD & SSID Guy Wire Band
Note: SSID 3”, 9” and 24” not available. -
SSD & SSID Roof Brace
Note: SSID 3”, 9” and 24” not available. -
SSD & SSID Anchor Plate HD
Note: SSID 3”, 9” and 24” not available. -
SSD & SSID Length Anchor Plate
Note: SSID 3”, 9” and 24” not available. -
SSD & SSID Anchor Plate
Note: SSID 3”, 9” and 24” not available. -
SSD & SSID Roof Support
Note: SSID 3”, 9” and 24” not available. -
SSID Wall Support HD
-
SSD Wall Support HD
-
SSD & SSID Wall Support
Note: SSID 3”, 9” and 24” not available. -
SSD & SSID Cradle Support
Note: SSID 3”, 9” and 24” not available. -
SSD & SSID Suspension Band
Note: SSID 3”, 9” and 24” not available. -
SSD & SSID Roof Thimble Insulated
Note: SSID 3”, 9” and 24” not available. Roof penetration opening dimensions available in the installation instructions manual. -
SSD & SSID Roof Thimble
Use when penetrating floor/roof levels. -
SSD & SSID Wall Thimble Insulated
Note: SSID 3”, 9” and 24” not available. Wall penetration opening dimensions available in the installation instructions manual. -
SSD & SSID Wall Thimble
Note: SSID 3”, 9” and 24” not available. Wall penetration opening dimensions available in the installation instructions manual. -
SSD Universal Muffler
Use to reduce the noise of an appliance. Install as a regular section in the evacuation line. No adapters required. Drain plug not included. -
SSD & SSID Eccentric Step Reducer
Note: SSID 9” and 24” not available. -
SSD & SSID Eccentric Tapered Reducer
Note: SSID 9” and 24” not available. -
SSD & SSID Step Reducer
Note: SSID 9” and 24” not available. -
SSD & SSID Tapered Reducer
Note: SSID 9” and 24” not available. -
SSD & SSID Eccentric Step Increaser
Note: SSID 3”, 9” and 24” not available. -
SSD & SSID Eccentric Tapered Increaser
Use to transition to a larger diameter pipe. Prevents condensate puddling when used on horizontal runs. Aids in reducing formation of condensates. Maximum 10” difference between diameter increase size on both sizes. Available in custom size combinations. -
SSD & SSID Step Increaser
Use to increase vent diameter when space constraints are an issue. Available in custom size combinations. -
SSD & SSID Tapered Increaser
Use to increase vent diameter. Creates a smooth transition for an undisruptive flow. Available in custom size combinations. -
SSD & SSID Drain Tee Cap
Drain plug not included. Drain Ø4 – Ø10, 1/4 NPT, 1/2 0.D Drain Ø12 – Ø24, 3/8 NPT, 5/8 0.D Note: SSID 3”, 9” and 24” not available. -
SSD & SSID Tee Cap
Use to cap Standard Tee, Branch Tee or Boot Tee. Remove Tee Cap to inspect the system; clean out debris or collected condensate. -
SSID Barometric Tee
Available with smaller snout and custom height. 9” and 24” not available. -
SSD Barometric Tee
Available with smaller snout and custom height. -
SSD Lateral SecureTEE 88-Degree
Use to transition from horizontal to vertical with improved flue gas flow. 9” and 24” not available. -
SSD Lateral SecureTEE 88-Degree
Use to transition from horizontal to vertical with improved flue gas flow. -
SSID Lateral SecureTEE
Use to transition from horizontal to vertical with improved flue gas flow. 9” and 24” not available. -
SSD Lateral SecureTEE
Use to transition from horizontal to vertical with improved flue gas flow. -
SSID 90-Degree Tee Y
Available with smaller snout. 9” and 24” not available. -
SSD 90-Degree Tee Y
Available with smaller snout. -
SSID 90-Degree Tee
Use for a 90° offset, or to combine connections from two or more appliances into a common vent. Can also use as a condensate management point when used in conjunction with drain fitting. All Standard Tees are completely welded. 9” and 24” not available. -
SSD 90-Degree Tee
Use for a 90° offset, or to combine connections from two or more appliances into a common vent. Can also use as a condensate management point when used in conjunction with drain fitting. All Standard Tees are completely welded. -
SSID 88-Degree Tee
Use for a 88° offset, or to combine connections from two or more appliances into a common vent. Can also use as a condensate management point when used in conjunction with drain fitting. All Standard Tees are completely welded. 9” and 24” not available. -
SSD 88-Degree Tee
Use for a 88° offset, or to combine connections from two or more appliances into a common vent. Can also use as a condensate management point when used in conjunction with drain fitting. All Standard Tees are completely welded. -
SSID 45-Degree Tee
Use in place of any tee for a 45° angle instead of 90°; can be used as a manifold connection to gang multiple boilers into a common vent. 9” and 24” not available. -
SSD 45-Degree Tee
Use in place of any tee for a 45° angle instead of 90°; can be used as a manifold connection to gang multiple boilers into a common vent. -
SSID 43-Degree Tee
Use in place of any tee for a 43° angle instead of 90°; can be used as a manifold connection to gang multiple boilers into a common vent. 9” and 24” not available. -
SSD 43-Degree Tee
Use in place of any tee for a 43° angle instead of 90°; can be used as a manifold connection to gang multiple boilers into a common vent. -
SSID 90-Degree Elbow
Use to go from horizontal to vertical runs or vertical to horizontal runs. Use to turn vent 90°. 9” and 24” not available. -
SSD 90-Degree Elbow
Use to go from horizontal to vertical runs or vertical to horizontal runs. Use to turn vent 90°. -
SSID 88-Degree Elbow
Use to transition from a vertical to a horizontal run. Stabilizes a 2° pitch towards the condensate drain for good condensate management. 9” and 24” not available. -
SSD 88-Degree Elbow
Use to transition from a vertical to a horizontal run. Stabilizes a 2° pitch towards the condensate drain for good condensate management. -
SSID 45-Degree Elbow
Offsets obstructions as needed. Allows for better condensate management and less back pressure. 9” and 24” not available. -
SSD 45-Degree Elbow
Offsets obstructions as needed. Allows for better condensate management and less back pressure. -
SSID 30-Degree Elbow
Offsets obstructions as needed. Allows for better condensate management and less back pressure. 9” and 24” not available. -
SSD 30-Degree Elbow
Offsets obstructions as needed. Allows for better condensate management and less back pressure. -
SSID 15-Degree Elbow
Offsets obstructions as needed. Allows for better condensate management and less back pressure. 9” and 24” not available. -
SSD 15-Degree Elbow
Offsets obstructions as needed. Allows for better condensate management and less back pressure. -
SSID 2-Degree Elbow
Use to facilitate the 2° pitch required in horizontal runs. Offsets obstructions as needed. Allows for better condensate management and less back pressure. 9” and 24” not available. -
SSD 2-Degree Elbow
Use to facilitate the 2° pitch required in horizontal runs. Offsets obstructions as needed. Allows for better condensate management and less back pressure. -
SSD Telescopic Lengths
Telescopic lengths do not require cutting to fit dimension. -
SSD & SSID Vent Flow Regulator
Note: SSID 3”, 9” and 24” not available. -
SSD K&W Fixed Blade Damper Lengths
-
SSD & SSID Damper Lengths Short
Note: SSID 3”, 9” and 24” not available. -
SSD & SSID Damper Lengths
Note: SSID 3”, 9” and 24” not available. -
SSD & SSID Drain Lengths
Drain plug not included. Drain Ø4–Ø10, 1/4 NPT, 1/2 O.D Drain 12–Ø24, 1/2 NPT, 5/8 O.D Note: SSID 3”, 9” and 24” not available. -
SSD & SSID Test Port Lengths
Use to test for proper appliance operation without penetrating the vent wall. Easy access to perform flue gas analysis. Test port plug included. -
SSD & SSID Adjustable Lengths
Use to add length to straight length of Secure Seal pipe. Adds 2”–14” of length. Requires at least 4” overlap for a secure connection. Available in Custom Lengths. -
SSD & SSID Lengths
Use to vent category II, III and IV appliances.